UTC TruVision IP Dome Instrukcja Użytkownika Pobierz pdf (Strona 39)

3BChapter 4: Configuring the camera

TruVision IP Dome Open-Standards User Manual 35

• Motion and alarm

5. If you selected “Section recording”, click the day of the week required and

then for section (period) 1 set the start and end times during which you want

the camera to begin and end recording.

From the drop-down list box select one of the record types to record.

Repeat for additional periods in the day. Up to four time periods can be

selected.

Note: The four time periods cannot overlap.

6. Set the recording periods for the other days of the week if required.

Use the Copy to option to copy the recording periods to another day of the

week.

7. Click Save to save changes.

Notes

• The camera will prompt you to reboot in order for the schedule to take effect.

• If you set the record type to “Motion detection” or other related alarm types,

you must also define the motion detection alarm in order to trigger motion

recording. See “Motion detection alarms” below for more information.

Motion detection alarms

You can define motion detection alarms. A motion detection alarm refers to an

alarm triggered when the camera detects motion. However, the motion alarm is

only triggered if it occurs during a programmed time schedule.

Select the level of sensitivity to motion as well as the target size so that only

objects that could be of interest can trigger a motion recording. For example, the

motion recording is triggered by the movement of a person but not that of a cat.

You can define the area on screen where the motion is detected, the level of

sensitivity to motion, the schedule when the camera is sensitive to detecting

motion as well as which methods are used to alert you to a motion detection

alarm.

Use the “Motion detection” screen in the “Channel parameters” folder to change

the motion detection settings.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 65 66

Brak uwag

UTC TruVision IP Dome Instrukcja Użytkownika Strona 39