UTC TruVision IP Dome Instrukcja Użytkownika Pobierz pdf (Strona 11)

1BChapter 2: Installation

TruVision IP Dome Open-Standards User Manual 7

Dome and IR dome camera connections

Note: Do not attempt to extend the power/data cable connection using RJ45

couplers and Cat5 cable. Only use the data cable connection provided.

Note: Use 12 VDC or PoE.

Figure 3: Connections on the base of the dome and IR dome cameras

1. Ground

Connect to ground.

2. Ethernet RJ45 PoE port

Connect to network devices.

3. Audio output

Connect to an audio output.

Line level, 600 Ω.

4. Initial set

Press to hard reboot camera.

5. Audio input

Connect to an audio input.

2.0 to 2.4 Vp-p, 1 kΩ.

6. RS-485 D+, D-

Connect to an RS-485 device such as a

PTZ dome camera.

7. Alarm outputs

Connect 1A/1B and 2A/2B to alarm output

devices.

8. Alarm inputs

Connect IN1/GND and IN2/GND to alarm

input devices.

9. Power supply

Connect +12 VDC power supply.

Note: The alarm output can be used to turn on and off an external alarm device.

Connect a 12 VDC/30 mA external power supply to the alarm output. See

Figure 4 below.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 65 66

Brak uwag

UTC TruVision IP Dome Instrukcja Użytkownika Strona 11